Reasons Why Your Nissan Qashqai Key Fob Won't Work
The Qashqai's larger dimensions give it a distinct SUV-like feel. Its ride on 19-inch alloy wheels in Ti and STL models may also be a bit firm. The front tyres of Qashqai are also prone to losing grip on rough surfaces and the CVT may occasionally display wrist-flexing torque steering.
This is typically caused by dead batteries, which can be replaced in a matter of minutes. Make sure the new battery is of the same voltage, size and specification.
Water Damage
One of the main reasons that a Nissan key fob displays the "key ID is not correct" message is due to water damage. The key fob comes with rubber seals that shield the electronic chip inside, but prolonged exposure to moisture can cause it to stop working properly. This is often the case if you've dropped your key fob in the ocean or into a swimming water pool, but it could happen when it's wet due to soapy hands or rain.
If your key fob has been exposed to water for an extended period of time, it could need to be cleaned with isopropyl alcohol, or electronic cleaner. Or, it could require a visit to a specialist for repair or replacement.
If your key fob does need to be replaced the process is simple. Make sure you have the proper multipack (CR2032, 3V). Then, you can open the front and back cases with the small flathead screwdriver. You'll need to remove the clips that hold the metal together and push out the old battery, then put in the new one. After reassembling the fob put the mechanical key back into place and check that it operates correctly. If nissan navara replacement key cost does not then you'll need to take it to an Nissan dealer or a professional auto locksmith for the replacement of the key chip. The chip is usually not damaged by water so it should not cost a lot.
Dead Coin Battery
Another reason that the reason your Nissan Qashqai key fob may not function is because the battery in the coin has gone dead. The batteries typically last between 3-5 years but can go bad over time, especially when the fob is dropped frequently. It is possible to replace the battery with a fresh one, but make sure it's the same size and voltage as the original. If you are using a different battery, it can cause the key to have an incorrect key ID that could hinder it from pairing with your vehicle.
The best way to replace the battery of a coin on the Nissan Qashqai key fob is by prying open the fob with an small screwdriver that has a flat head. In the screwdriver, push it into a small notch at the bottom of the fob, and move it around to separate the two halves of the key fob. Then, remove the old CR2025 button cell battery and replace it with an alternative one after taking note of its location in the fob.
Before you put the new battery in, make sure there is no dirt or water damage on the terminals. If there is, wash the terminals using a small amount of isopropyl alcohol. Make sure that the pole cables are connected correctly. They should be connected both the negative and the positive poles of your battery.
Diagnostics of a fault
If your Nissan Qashqai's keys fob stops working after exposure to clean tap or rain water, this could be a sign there's an issue with the internal chip. You'll require a new keyfob if you can't solve the issue by replacing the battery. If the key fob has stopped working after you dropped it, it's likely that the chip inside was damaged. It is possible to get the key fob to work once again if it is removed and clean the chip using paper towel and isopropyl alcohol before putting it back into.
A common error that you will see on the dashboard of your vehicle is "Key ID Incorrect." The vehicle is not able to recognize the key fob, and consequently, won't allow the car to start. This issue can be caused by several ways, such as water damage, issues that are undetectable in the circuitry of the key fob or RFID interference.
If the 12 volt battery in your key fob is inactive or is not supplying enough electrical current, it will stop working. This can affect the Nissan Qashqai's keyless system central locking, as well as the capability to start the engine using the key fob. If you're unable lock or unlock the door manually You should examine the batteries on your key fob to make sure they are in good condition. You can also try installing the battery again to reset your transmitter.
Reprogramming
If the key fob had not been submerged in salt water and is unable to come back to life after a quick wash with clean water. You can also clean the electronic chip using isopropyl or electronic cleaner. If none of these work then you might need to replace the key fob.
If your Nissan Intelligent Key is still not working, there could be a problem with the connection between it and your car. To reconnect it, begin by turning the key in the ignition, but not starting the car. Continue to do this until the hazard light blinks twice. Turn off your vehicle and remove the key.
Then, you need to then open the fob compartment in your vehicle. It is usually located on a door jamb or the handle of the door for the driver. Find the small "program" button and press it. You should hear a chime after the process is completed.
Now that your Intelligent Key is relinked to the car It's time to test it out. Click all the buttons on the key while you are at a distance away from the car. If the lights flash, or the horn sounds, then the key is successfully connected to the Nissan. You can also test it close to the Nissan.